TALK TO US +1 (407) 315-2310 OR

WITH EUROPEAN DIVISION YOU CAN CHAT AT +49 1573.98.79.570 / CALL AT +39 333.88.70.129

NO CUSTOM DUTIES FOR U.S. CUSTOMERS (WE’RE BASED IN THE U.S.A.)

AND

NO CUSTOM DUTIES FOR EUROPEAN CUSTOMERS (EU SHIPPING DEPT. ITALY)

 

CatCams Vw Audi Mk3 Gti Abf 7671312 full race Camshafts

759.00 $ VAT excl.

-

CatCams Vw Audi Mk3 Gti Abf 7671312 full race Camshafts

Catcams 7671312 full race Camshafts 

ILLUSTRATIVE IMAGE ONLY
Volkswagen ABF 150hp
I-4cyl 2.0L 16v DOHC (DTH/DTH)
CatCams Vw Audi Golf Gti Mk3 Abf  7671312 full race Camshafts 
REMARKS :
#
- cast iron camshafts
#
- valve clearance is to be adjusted using mechanical lash caps
-
please make sure that the lash cap does not touch the valve locks !
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15° before TDC on exhaust, and after TDC on intake
#
ONLY for use in competition engines with independent engine management (throttle position sensor) or carburettors
intake
exhaust
camshaft data:
lash ramp
: 0.25mm
0.25mm
duration @ 0.1mm
: 303°
293°
duration @ 1.0mm
: 268°
258°
valve lift
: 13.45mm
12.75mm
cam lift
:
lobe angle
: 106°
106°
timing @ 1.0mm
: 28° / 60°
55° / 23°
valve lift @ TDC
: 4.95mm
4.20mm
parts setup:
cam wheels :
View TVW033
View CTVW006
follower
View CC005
View CC005
valve lash
View TS102
View TS102
valve
 O.E.M.
 O.E.M.
valve locks
 O.E.M.
 O.E.M.
upper retainer
View 99315
View 99315
lower retainer
 not available
 not available
exterior spring
View PAC-E12009
View PAC-E12009
interior spring
View PAC-I12009
View PAC-I12009
fitted load / length
: 30kg @ 34.0mm
: 30kg @ 34.0mm
max. load / lift
: 100kg @ 14.0mm
: 100kg @ 14.0mm
REMARKS :
#
check distance between valve seal and retainer to be at least 0.6mm at full lift
#
if required, machine cylinder head and / or use solid shims to adjust spring load
#
ONLY for 7mm valves with tripple groove (MK-7H valve keepers)

759.00 $ VAT excl.

-

Sportignition
0
    0
    Your Cart
    Your cart is emptyReturn to Shop