Select Page

I.E. Rail direct Port for Intake Manifold Vw Audi A3 Golf Gti Jetta IEIMVC17

 180,00 Tax excl.

I.E. Rail direct Port Vw Audi 2.0Tfsi 2.0Tsi IE Intake Manifold IEIMVC17
LEADING FUEL RAIL FEATURES
  • Allows for 4 additional fuel injectors on 2.0T FSI & TSI engines
  • Will accept EV1 & EV14 compact fuel injectors
  • Perfect for big-power big turbo and race engines
  • Get past the direct injection “fuel limit ceiling”
  • Adapt to existing fuel system with -6AN inlet/outlet
  • Designed & engineered to fit IE Direct Port Intake Manifold
2.0T TSI/TSI DIRECT PORT FUELING LIMITATIONS

When building big power/big turbo engines for the 2.0T FSI (EA113) or TSI (EA888 Gen1/2) engine, the stock direct injection fuel system quickly becomes under-spec as power level rise and ultimately limit the power levels achievable due to the low-pressure fuel pump, high-pressure fuel pump, and injectors. DI injector upgrades are very limited and mostly non-existent, even with HPFP and LPFP upgrades most 2.0T FSI/TSI builds top out at around 500-550HP on pump fuels due to fuel limitations.

INTRODUCING THE IE 2.0T DIRECT PORT INJECTION KIT

To overcome the fueling limitations, IE engineers have designed the ultimate base kit for adding a second set of injectors to your build. The plastic OEM intake manifold is replaced with our own 2.0T FSI/TSI intake manifold that has been specially modified with injector bungs to accept your choice of EV14 or EV14 compact style fuel injectors using 14mm o rings. The direct port fuel rail includes brackets and hardware to mount to our manifold directly and is machined with -6AN o ring boss inlet and outlet to accept easy-to-source AN fittings to adapt your fuel system. This is the same setup we used on our in-house MK6 GTI drag project to deliver enough fuel for over 700HP!

VEHICLE SPECIFIC INSTALL KITS

Designed specifically for each individual application, IE Intake Manifold Install Kits are complete with all hardware necessary to install your new IE 2.0T cast intake manifold. These kits including all needed brackets to fasten OEM lines and components, as well as couplers to plumb the valve cover breather, vacuum connections, and throttle body. Verify the correct install kit for your vehicle below before ordering. This kit is for the installation of the intake manifold, not to set up the port injection.

2.0T FSI (EA113) TRANSVERSE KIT

  • VW – MK6 Golf R (2012-2013)
  • VW – MK5 GTI 2.0T FSI (2006-2008)
  • VW – MK5 Jetta & GLI 2.0T FSI (2005-2008)
  • AUDI – 8J/MK2 TTS (2009-2015)
  • AUDI – 8J/MK2 TT 2.0T FSI (2008-2010)
  • AUDI – 8P/MK2 A3 2.0T FSI (2006-2008)

2.0T FSI (EA113) LONGITUDINAL KIT

  • AUDI – B7 A4 2.0T FSI (2005-2008)

2.0T TSI (EA888 GEN 1 & GEN 2) TRANSVERSE KIT

  • VW – MK6 GTI 2.0T TSI (2010-2014)
  • VW – MK5 GTI 2.0T TSI (2008-2010)
  • VW – MK6 Jetta & GLI 2.0T TSI (2011-2013)
  • VW – MK5 Jetta & GLI 2.0T TSI (2008-2011)
  • AUDI – 8J/MK2 TT 2.0T FSI (2010-2015)
  • AUDI – 8P/MK2 A3 2.0T FSI (2008-2013)

2.0T TSI (EA888 GEN 1 & GEN 2) LONGITUDINAL KIT

  • AUDI – B8 A4 2.0T TSI (2009-2013)
  • AUDI – B8 A5 2.0T TSI (2009-2013)

Share and Enjoy !

0Shares
0 0
Share this: