The GenV HyperGate45 Compressed Gas external wastegate is a cost effective, high performing external wastegate designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing, or compressed air WRC applications.

The Compressed Gas range feature an inverted diaphragm to maximize diaphragm life from high pressure CO2 or compressed air systems.

The GenV provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity.
The GenV External Wastegate from Turbosmart was a ground up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it.
A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base for easy, 360 degree optional routing of reference hoses, strap-type V-band clamps, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.

Available In
Black, Blue
Wastegate Position Sensor Version & Upgrade

Features
Class Leading, Thermal Performance
Class Leading, CFD & Bench Validated Flow Performance
Class Leading Fatigue Resistance
Nitronic 60 Valve Guide & High Temp 347 SS Body
17/7 PH Stainless Steel Springs
Liquid Actuator Cooling Option
Strap Type V-band clamps
User Adjustable Actuator Position
Modular Design for Actuator Interchangeability

SUPPLIED WITH

GenV Wastegate unit

All Springs Included in Box

Wastegate Pre-fitted as Per Description

GenV SS316 Valve seat

GenV Inlet & Outlet V-Band Clamps

GenV Inlet & Outlet Flanges

Mounting Bolts and Nuts

Collar tool (master/slave)

4 x 1/8” NPT plugs (1x installed)

2 x 1/8” NPT nipples

Turbosmart Decal

What is a Compressed Gas Wastegate?

A ‘Compressed Gas Ready’ wastegate is designed and built to accept a high-pressure reference signal to the actuator housing. Co2 is the most common application and allows an independent boost control reference via a separate storage tank & solenoids for more complex boost control strategies.

Do I need to use the liquid cooling ports?

No. It is purely an option for extreme applications where there is limited air flow around the wastegate.

What makes it so thermally advanced?

There are several features, some easily overlooked or hidden. Starting with the valve, there are advanced designed features that ensure thermal dissipation. Thermal transfer was reduced with the use of ceramic spacers either side of the vale guide and huge amount of CFD performed to ensure the most efficient movement of exhaust energy, which also equates to flow.

Can I rotate the top housing?

Yes. The modular design of the Gen-V Range of External Wastegates means you can rotate the actuator housing 360 degrees, for virtually unlimited reference hose routing options.

Will a Gen-V version fit where my 4th Generation Turbosmart Wastegate fit?

Yes. We made sure the inlet and outlets fitting orientation matched the previous gates for that exact reason. Literally the only thing in common between the previous design and this one, is the mounting orientation.

How do I change the spring(s)?

You will need the locking collar tool as supplied in the box. You also need to observe the instructions and apply pressure to the top cap before you can remove the collar – This is part of the design & an important anti-vibration measure.

What size are the reference fittings?

Both the boost control reference ports and the (Optional) liquid cooling ports are 1/8NPT. We have a range of AN adapters and high temp push-lock fittings available in the Spares and Accessories Tab.